Popsicle Mold Holder (Single and 2 x 3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This base is a replacement for the one that comes with the Popsicle Molds Set from Chuzy Chef on Amazon. It works better
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This base is a replacement for the one that comes with the Popsicle Molds Set from Chuzy Chef on Amazon. It works better by holding the molds more securely. I printed mine using PETG with a .6mm nozzle and .32 layer height on a Prusa MK4. I suspect PLA should work fine but haven't tested it. The specific mold set can be found here: Popsicle Molds Set
I like these molds because they are larger than many. I also include the STL for a single mold holder. This can be handy when you are refilling just one mold that can then be transferred to the one in the freezer.