Spooler Centering Disc for Bambu Lab Spools 53 x 60
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fix for when the master spool unlocks and splits open.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had a Bambu Lab spool unlock and split right after I wound a full 1K of filament onto it. Making things worse, the spool got away from me and the filament unwound to the point where the Bambu spool would not lock back together.
This is the second time I have had a spool disaster while attempting to re-spool filament.
This time I thought of a way to reduce the frustration in fixing the situation.
I remixed a centering disk to have a longer inner shaft. The idea is to slide the two halves of the Bambu spool onto the new centering disk and lock them together with the existing Donor Spool Holder Axle.
I also embossed the number 53 onto the outside of the centering disk to clearly indicate the size of spool it would hold.
There are no .step files, this was a simple cut/paste/resize done in Microsoft 3D builder.
I printed mine with 7 shells, 30% infill, no supports, no brim.
You may never need this model if you make sure your master spool is locked before starting a respooling operation.
This helped me immensely, I hope it will help others too.