a8 p802ma spool mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dec 20 2018 Update filclip1 made a bit stronger..at the hook .
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Dec 20 2018 Update filclip1 made a bit stronger..at the hook . ( its reversible if you put it on the inside of the spool so it doesn't interfere with the x carriage near the top..
Added custom z couple. ( no stretch to help with z wobble) with captured nuts and m3x15mm screw holes (print this solid)
soon to add to thiscolelction is my topside z wobble fix with bearing captured and replace the top piece of acryl so its one piece.
Made clips to print to hold the spool holder that came with the p802ma on top of the printer solidly but still be easily removable. i recommend petg for the part but pla works fine too ( just easier to break)
take the factory provided holder and put on left side top of printer.. big square clip on the outside j hook clip on the inside clips near display ..
and the guide goes in teh oval hole to ease edges grinding on filament.. ( next version will have a cleaner sponge for it)
please show prints and feedback :) i love to iterate designs.. and likely will provide f360 step files when i perfect it.. after using it a while
Print instructions
Category: 3D Printer Accessories Summary
Dec 20 2018 Update filclip1 made a bit stronger..at the hook . ( its reversible if you put it on the inside of the spool so it doesn't interfere with the x carriage near the top..
Added custom z couple. ( no stretch to help with z wobble) with captured nuts and m3x15mm screw holes (print this solid)
soon to add to thiscolelction is my topside z wobble fix with bearing captured and replace the top piece of acryl so its one piece.
Made clips to print to hold the spool holder that came with the p802ma on top of the printer solidly but still be easily removable. i recommend petg for the part but pla works fine too ( just easier to break)
take the factory provided holder and put on left side top of printer.. big square clip on the outside j hook clip on the inside clips near display ..
and the guide goes in teh oval hole to ease edges grinding on filament.. ( next version will have a cleaner sponge for it)
please show prints and feedback :) i love to iterate designs.. and likely will provide f360 step files when i perfect it.. after using it a while
Print Settings
Printer Brand:
Anet
Printer:
A8
</div>Rafts:Doesn't Matter
Supports:
Yes
</div>Resolution:.2mm or .4mm
Infill:
i went solid cause not much infill
</div>Filament:
Amazon Basics pla white
Notes:
I will print next ones in orange petg to keep color scheme and strengthen part. (pla is brittle )