HF yellow organizer box compartments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Harbor Freight sells a knock-off yellow/black organizer.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 1223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Harbor Freight sells a knock-off yellow/black organizer. I found that the included compartment sizes didn't necessarily meet my needs and resulted in a waste of space. I created new compartments that are 1 wide but 2 or 3 compartments long. There are also a set of dividers for the larger 2x2 bins that will break them up into smaller 6 compartments groups.
When small items are in the compartments and you pick up the organizer to carry, sometimes the items will work their way out of their original bins and settle to the bottom(back) of the organizer. To try to address this I created a set of tops for the 6 bin separators. Because the lid has guides in it based on the small factory compartments sizes I had to give the lids an odd shape. The lid top guides are also a bit different shape near the edges so there are some slightly modified versions if you want to put the 6-bin separators near the hinge or right side (I didn't make one for the left but mirroring it should work)
Print instructions
The bins have small feet on the bottom to help hold them in the intended positions (there are cut-outs on the organizer body). To use these you will need to print with supports. If you don't want the feet then just adjust cut the model off at the bottom.
I used PLA default settings.
