Rezodo weather station "wind only" version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a "wind only" box which is part of the "Long Range weather station". (blue box on the picture). You will need…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a "wind only" box which is part of the "Long Range weather station". (blue box on the picture).
You will need to print also the anemometer and the wind direction sensor https://www.thingiverse.com/thing:5999510 https://www.thingiverse.com/thing:5997239
All this is part of the project hosted by hackaday. https://youtu.be/Ip0mMkWtPtQ
This project is finalist of the Hackaday's Prize 2023.
If you like this design, support my project by following it on hackaday : (follow and like buttons) https://hackaday.io/project/191652-long-range-weather-station.
You can see sensors values in real time here : https://thingspeak.com/channels/2209680
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
.3mm
Infill:
20
Filament: none PET blue plastic bottle
Category: Electronics