Lora 868MHz biquad antenna
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is part of my Long Range Weather Station project : https://hackaday.io/project/191652-long-range-weather-station…
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 362
- Wydruki
- 1
- Wyświetlenia
- 3991
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is part of my Long Range Weather Station project : https://hackaday.io/project/191652-long-range-weather-station
I wanted to increase range for my 868 MHz lora devices. I followed the link of this "biquad calculator" : https://www.changpuak.ch/electronics/bi_quad_antenna_designer.php
Biquad antenna is a kind of loop antenna with a simple design, easy to build and offers a good characteristic of directivity and gain for point to point communications. It consists of two radiating elements made of connected squares with the side length equal to ¼ mid-band wavelength.
I built this simple jig which can be used both for folding the 2mm coper wire, but also as a permament holder.
To even increase the range I should have added a metal ground plane to reflect the back lobe to the front side.
Without this ground plane my antenna acts more like an "omni" antenna. But who cares ? It works fine !
Print it in PET or PETG to resist to rain, UV and high temperatures...
I printed it with home made PET plastic bottle filament : https://hackaday.io/project/185196-pullstruder-from-plastic-bottle-to-pet-filament
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
.3mm
Infill:
20
Filament: none PET green plastic bottle
Category: Electronics