1 / 1
V0 1515 extrusion slot cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cover to keep the slots clean or keep wires tucked in the slots.
- Ocena
- 4,889 / 5
- Polubienia
- 101
- Pobrania
- 788
- Wydruki
- 10
- Wyświetlenia
- 2288
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 10) (Komentarze: 15)Remiksy (2)Kolekcje (239)Powiązane
A cover to keep the extrusion slots clean or keep wires tucked in there.
Works with both LDO and MakerBeamXL profile.
Prints vertically and it snaps into the slot.
You can also try printing it laying down flat but you might need to adjust the scale for a snug fit.
Use 0.4mm line width and enable brim for better bed adhesion.
I print short segments of 20mm length to make it easier, but you can scale it to the length you want.