25 mm Circular Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These circular bases have a small chamfer added to the bottom surface. They are great for both fdm and sla/msla printing
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 1129
- Wydruki
- 0
- Wyświetlenia
- 2028
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution
I recently got into miniature printing using and msla printer in particular. I have struggled to print consistent flat surfaces on an angle using this technology. I have been fdm printing for 5 years, but msla printing is its own beast.
I can get a consistent base if I print flat onto the buildplate, but most bases become very difficult to remove from the buildplate at that point. I noticed in chitubox and lycheeslicer that the bases for their supports actually have a chamfer modelled in that makes removal quite. a bit easier.
These bases have a slight chamfer modelled in so I can print them flat on my build surface and remove them without too much trouble in the end.