1 / 1
Pirate Silhouette (Filament Painting) — zdjęcie 1

Pirate Silhouette (Filament Painting)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filament painted print made using HueForge - Filament swaps ONLY, no mmu/ams required

Ocena
5 / 5
Polubienia
48
Pobrania
106
Wydruki
2
Wyświetlenia
623
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

3 colour HueForge model. Pirate Silhouette filament painting made using Sunlu pla+ filaments

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.28mm

Filaments Used:
PLA Sunlu PLA+ Black Transmission Distance: 0.6
PLA Sunlu PLA+ Orange Transmission Distance: 10
PLA Sunlu PLA+ White Transmission Distance: 7

Swap Instructions:
Black until layer #4 at 0.52mm
Orange until layer #10 at 1mm
White for the rest.
 

This is a filament blending model, I would recommend trying to match the td as close as possible if not using the exact filaments to get the best results

Use the exact numbers in your slicer to match up properly.

model can be resized but keep the ‘Z’ height the same, designed to print with 0.4 nozzle

Tagi