Air Assist for Sovol SO-2 10w
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clamp on airassist nozzle for the Sovol SO-2 10W laser. Allows you to have an air assist without modifying the machine
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The Sovol SO-2 10 watt laser has a design which makes installing a proper air assist difficult without drilling through or replacing the “don't blind me” shield. This design clamps around the top of the shield so and points a nozzle through a small opening in the guard. I moved the clamp upwards so you can still see the laser dot and align the engraving properly. Smoghog has another (better) design which entirely replaces the safety guard, but I didn't want to go through all that for such a cheap machine :)
The ALT version works exactly the same way as the main, but is designed to have the shield rotated such that the nozzle blows towards the vent of most laser enclosures. I use a Comgrow desktop enclosure (can not recommend) which has the vent on the right hand side (while facing the laser)
-----------------------------------------------------------------------------------------------------------
Required hardware:
1x M4 x 16mm bolt
1x M4 nut
1x 3/16 air tube (standard for aquarium air pumps)
1x Air pump of your choice :)
(Optional) 1.0mm MK8 nozzle (Good for weaker pumps, as it speeds up airflow to a degree)
-----------------------------------------------------------------------------------------------------------
I am currently using the ALT version on my machine, and it works great! I took the nozzle off to get wider airflow. Using a $20 aquarium pump I found on amazon, which has a LOT of pressure for the small size.
The air pump I use: https://www.amazon.com/dp/B0965T4HVV?psc=1&ref=ppx_yo2ov_dt_b_product_details
^ It is pretty loud, but most of the sound comes out of the tube, and gets deadened once you close your enclosure.
Amazon reviews state that the pump can get pretty hot with extended use, so I made a fan bracket to attach 80mm fans to it. (This post also includes a hose adapter for the pump)
https://www.printables.com/model/533758-80mm-fan-mount-for-kulife-air-pump
-----------------------------------------------------------------------------------------------------------
Print settings:
Nozze: 0.4mm
Layer Height: 0.1mm
Speed: 60mm/s for most of it, use a bounding box to slow down near the threads if need be.
Infill: 50%
Supports: Yes (block any supports in the nozzle / air tube holes, and at the clamp's bolt hole)