1kg Reusable Spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spool for unspooled 1kg filament. Since the spool is meant to fit an Ender 3 bed it is a little small so cut off or…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 775
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A spool for unspooled 1kg filament. Since the spool is meant to fit an Ender 3 bed it is a little small so cut off or use around 20 to 30 ft of filament first or scale up the spool to fit your printer. The 2 halves should be able to hold together with fiction but if not put blue tape around the smaller diameter spool to make it so they can come apart but still fit snugly. To be used with filament from Micro Center (link at bottom of summary)or any other unspooled filament you have laying around. Use this filament welder to use long strands of scrap filament to make multicolored filament to put on this spool (Thingiverse link below also) Have fun printing!
https://www.thingiverse.com/thing:5505014
Category: 3D Printing