50mm Rail Drawer - fits Delta 36-725T2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There's so much wasted space inside that steel rail on that tablesaw. Let's fix that.
- Ocena
- 4 / 5
- Polubienia
- 24
- Pobrania
- 158
- Wydruki
- 1
- Wyświetlenia
- 787
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This drawer fits on any tablesaw with a 50mm front rail. In particular, those tend to be saws using a Biesemeyer fence design, chiefly Deltas but some licensees also use compatible sizing.
There exist other models that do similar if you want to comparison shop. One in particular prints nicely as a single piece, but doesn't have a good way to actually pull the drawer out of the rail; another is two-piece but assembly is less-than-stellar and the handle isn't ergonomic. I wanted to fix that.
Making the thing
You'll need one M3x10 or M3x12 screw to assemble it, or just some glue and a clamp I was lazy and used a socket cap, but the Right Choice™ would be a cheese head screw. It doesn't matter much.
One minor word of caution is that the screw hole in the drawer face is modeled; as such it will be slightly easier to assemble if you use Cura with Slicing Tolerance set to Exclusive, but I printed mine in PrusaSlicer and just used a little more grunt to screw it in. Because of the positive engagement between the drawer face and the box, it's easy enough either way.
Remixing the thing
F3D and STEP included because I'm not a jerk. Be not a jerk: include your source files.
Compatibility list
As usual--best guesses, affiliate links, gimme those Bezos dimes, like subscribe comment, etcetera etcetera.
- Definites:
- Delta 36-725 and 36-725T2 (available at Lowe's)
- Delta 36-505T2
- Fences using the T2 or T3 rail system, such as:
- Maybe, check first:
- JET JPS-10 Proshop II
- Retrofit JET Proshop II fences on other saws (much like the T2/T3 rail)
Please note: all my Printables models that are not a remix of others' work are licensed CC-BY-NC-SA. Commercial usage is available upon request; please reach out via email.