Original PS Logo (4 Color)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My slicer was detecting inconsistencies with CorrieD's model so I decided to remake it in Fusion 360.
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 427
- Wydruki
- 3
- Wyświetlenia
- 1774
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My slicer was detecting inconsistencies with CorrieD's model so I decided to remake it in Fusion 360.
This is fairly simple print. After you slice the model you can take the gcode to Prusa's Colorprint to insert the M600 command. Note the layer height at which you need the M600 command will vary with your resolution. Happy Printing!
Update 9/20/2018 - I added a 4mm tall version in case you do not want to print one too thick.
Update 12/30/2018 - Multi-Material files have been added.
Print instructions
To prepare the model for color changes the M600 command is needed. Have a quick look here to see how to add it!
Happy Printing!