1 / 4
Bambu glass riser remix of a remix (with recess for pi cam) — zdjęcie 1
1 / 4

Bambu glass riser remix of a remix (with recess for pi cam)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Thats a remix of a remix with some bug fixes and a recess for the ribbon cable

Ocena
0 / 5
Polubienia
1
Pobrania
36
Wydruki
0
Wyświetlenia
956
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Hi,

Thats a remix of a remix with some bug fixes and a recess for the ribbon cable.

 

The original is this one:

https://www.printables.com/de/model/361348-bambu-labs-carbon-x1-top-glass-riser-for-leds

The remix i used to make this remix is:

 

https://cults3d.com/en/3d-model/tool/bambu-x1c-top-glass-riser-remix-for-neon-led-stripe

 

Thanks to Daniel and mr_clean to share it with us.

 

My changes:

 

  • added a recess for the ribbon cable
  • some bevels have been added
  • the connector at the front has been corrected

how to print:

0.2 layer hight

Supports - recommended

led strip:

https://www.amazon.de/dp/B0BBFWQ78X?_encoding=UTF8&psc=1&ref_=cm_sw_r_cp_ud_dp_HXRVFNJJ0N7R31PJX8RZ

Note: the led strip has a silicone cover at the beginning. You simply have to remove this with a sharp knife - be careful with your fingers and the strip :-P

Assembly: Put parts together, insert led strips and secure with superglue. Cut off the led strip.

 

Update: fixed some bugs :-)

 

 

 

Tagi