Aluminium LED profile stand for bookshelf speaker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand for a triangle style aluminium profile to put under a bookshelf speaker to use it as vertical wall washer light.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 805
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to add some light behind my bookshelf speaker and stumble upon @Hasenpups model for the WLED Housing and got an idea from this.
The remix has a cut part of the base extended with a simple slap. The idea is to put the base with the extended slap part under a bookshelf speaker on a TV Board to add a wall washer light behind it.
This remix has a reinforced opening for the aluminum profile to slide into. I would recommend to use a modifier to reinforce this part of the print with more infill. (If you are using the 3mf there is a modifier placed)
There was also a channel added for cable routing on the underside.
Other parts are:
- Aluminium profile: https://www.amazon.de/gp/product/B07PSN77DY (same as OP)
- BTFLighting SK6812 RGBW LEDs: https://www.amazon.de/gp/product/B01MRSVY8G
- Controller: https://quinled.info/pre-assembled-quinled-dig-quad/
Software on the controller:
In the pictures the version has two cutouts to avoid the feet of my speaker. I added this with a negative volume just in the slicer. If you need some room for feet I would recommend to do the same.