Star Wars Interdictor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replica of an imperial Interdictor as seen in Star Wars Rebels.
- Ocena
- 5 / 5
- Polubienia
- 197
- Pobrania
- 889
- Wydruki
- 3
- Wyświetlenia
- 3440
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
A replica of an imperial Interdictor as seen in Star Wars Rebels.
Scale is 1:10,000. It's 11.3cm long, 6.7cm wide and 2.6cm tall. (Note that the “Interdictor Star Destroyer” from canon is much larger than the “Immobilizer Cruiser” from legends it's design is based on.)
File “print_sw_interdictor-standard.stl” is the ship itself.
File “print_sw_interdictor-stand.stl” is a simple stand.
Print instructions
Printed at 0.15mm layer height. Needs support on buildplate.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#
UPDATE [2022-01-29] Added Chimaera Emblem
Adapted the emblem from Thrawns ISD Chimaera for this model. To use it, first load the ship “print_sw_interdictor-standard.stl” and then add the files “print_sw_interdictor-chimaera_topside.stl” and “print_sw_interdictor-chimaera_underside.stl” as parts to it. (In PrusaSlicer, right-click → Add Part → load… → Select files)
There is no interdictor which carries this emblem that I know of.
UPDATE [2025-11-19] Improved Stand