1 / 7
Star Wars - The Rise of Skywalker - Textless Movie Poster Lithophane — zdjęcie 1
1 / 7

Star Wars - The Rise of Skywalker - Textless Movie Poster Lithophane

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom lithophane stand included.

Ocena
0 / 5
Polubienia
17
Pobrania
143
Wydruki
0
Wyświetlenia
1584
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Custom lithophane stand included.

I used machine learning to increase the original poster detail, then imported into Photoshop to remove the text and enhance further.

I'll post pics when I get around to printing this one.

If you just want the full size textless movie poster, the image file is here:
https://imgur.com/gallery/5gaQlim

Software used:
Photoshop, Luban, Meshmixer and S3D.

Dimensions: 138mm x 195mm x 5.8mm.

Print settings and information:
https://www.gadunky.com/litho-print-settings/

Note: This is a very large and detailed stl file and may put some systems/slicers under pressure. It slices best in Slic3rPE, Cura 3.6+ or S3D.

A note on slicing in Simplify3D:
It’s easiest to slice the lithophane in Cura(or Slic3rPE) as there’s an extra step in Simplify3D due to the way the lithophanes are created(this by design to allow additional editing/printing options for more advanced users).

If you want to use Simplify3D you just need to do the following:

Load the lithophane STL into S3D as normal.
Click Mesh–Separate Connect Surfaces
Slice as normal
The added bonus of doing this is you can re-crop the image into the frame if you wish, or easily resize or remove the frame altogether. Using this method you can also print the frame in one colour/material and the lithophane in another if your printer has that option.

If you don’t do the above in S3D there may be a tiny gap between the frame and the lithophane when you actually slice the model.

Check out more on my site: https://www.gadunky.com/

Print instructions

0.1mm layer height, 100% infill, 6-8 shells/walls.

Tagi