Adjustable Universal Shoulder Stock

Adjustable, Universal Shoulder Stock

Update 10 March 2019: Added thumbwheel for M3 x 20 screws

Update 01 September 2018: Customizable 3D printable tubing now included.

For use with cameras, bincoluars, spotting scopes or other hardware with standard 1/4" tripod threads.

Steadies the sight picture. Originally designed as assistive hardware to make birding more accessible to people with a hand steadiness condition, but really improves steadiness of hand-held optics for everyone.

Additional parts needed:

• 1/4" tripod screw
• M6 x 30 screw
• M6 hex nut
• M3 x 20 screw (2 pieces)

• M3 hex nut (2 pieces)
  Optionally needed (you can also print the tubes available through the OpenSCAD customizer):

• 25 mm outer diamater wooden staff (or plastic tube), cut off to the length required for your application
  Typical lengths for the wooden (or plastic tube) staff:

• for use with a Nikon ED50 (both angled or straight) spotting scope: 220 mm

• for use with Nikon 8 x 42 Monarch binoculars and a standard binocular-tripod adapter: 155 mm

Print instructions

Additional parts needed:

• 1/4" tripod screw
• M6 x 30 screw
• M6 hex nut
• M3 x 20 screw (2 pieces)
• M3 hex nut (2 pieces)

Optionally needed (you can also print the tubes available through the OpenSCAD customizer):

• 25 mm outer diamater wooden staff (or plastic tube), cut off to the length required for your application

Typical lengths for the wooden (or plastic tube) staff:

• for use with a Nikon ED50 (both angled or straight) spotting scope: 220 mm
• for use with Nikon 8 x 42 Monarch binoculars and a standard binocular-tripod adapter: 155 mm