Floor Joist Cable Hangers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a collection of hangers for hanging wires or cable from basement floor joists.
- Ocena
- 4 / 5
- Polubienia
- 4
- Pobrania
- 46
- Wydruki
- 2
- Wyświetlenia
- 474
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a collection of hangers for hanging wires or cable from basement floor joists.
-- These are printed right side up and without supports.
Hanger (Clip-On) - This is a clip-on hangers that supports running cables either direction. This has a built-in support that can be broken out after printing. The support was added to reduce weird artifacts from vibration.
Hanger (Clip-On, No Support) - This is the same as able but without the added supports.
Hanger (Mounted) - This is a mounted hanger that screws on the bottom of the joist. Just use one screw in the middle and you're all set (I used a short drywall screw). This can be rotated to use in either direction, even diagonally. There is a slit on one side for adding or removing the wires.
Category: Organization