Antique Lipstick Holder Recreation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Antique rotating lipstick holder recreated in Fusion 360. UNTESTED MODEL!
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Antique rotating lipstick holder recreated in Fusion 360.
Print 4 of “small gear1”, “door 1” and “linkage peg 1”
It's designed to be printed with minimal supports, but supports are still needed for the base, the drive nut, and a few other places. Just avoid using supports on the threaded parts especially. Everything should either press fit, or be held together by the main dome which screws on but if the base plate doesn't press fit, some glue may be needed. Tolerances were considered but they're printer dependent.
Godspeed and happy printing
UNTESTED MODEL. If you print it please let me know how it goes