Universal Binocular Tripod Mount (for roof prism glasses)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal Binocular Tripod Mount (for roof prism glasses) Fully customizable version will follow as soon as I have…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 560
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Universal Binocular Tripod Mount (for roof prism glasses)
Fully customizable version will follow as soon as I have cleaned up the OpenSCAD source code.
Additionally required:
- 2 pcs 500 mm pieces of shock cord (ca. 5 mm strength)
- 4 pcs cord stops
1 pc 1/4" hex nut
Binoculars will be held on the mount by one loop of the shock cord over each barrel at the oculars and one at the objectives.Thread cord through holes so that the four ends emerge from the four centre holes of the forward bridge. Arrest them with cord stops.
Print instructions
Category: Camera Summary
Universal Binocular Tripod Mount (for roof prism glasses)
Fully customizable version will follow as soon as I have cleaned up the OpenSCAD source code.
Additionally required:
- 2 pcs 500 mm pieces of shock cord (ca. 5 mm strength)
- 4 pcs cord stops
1 pc 1/4" hex nut
Binoculars will be held on the mount by one loop of the shock cord over each barrel at the oculars and one at the objectives.Thread cord through holes so that the four ends emerge from the four centre holes of the forward bridge. Arrest them with cord stops.