1x1 Gridfinity Glasses Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 1x1 Gridfinity module holds a pair of glasses.
- Ocena
- 4,5 / 5
- Polubienia
- 22
- Pobrania
- 132
- Wydruki
- 4
- Wyświetlenia
- 944
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This 1x1 Gridfinity module holds a pair of glasses. This is also a taller version for wider glasses. The glasses are balanced over the center of gravity so it doesn't fall over.
It was designed using a coil to produce a helical path that I used in a sweep to create a stiff, compound curve.
In two of the photos the glasses stand is resting on a vanity base: https://www.printables.com/model/511814-gridfinity-1x1-vanity-base
This was printed using my spool rotator with Amolen Gold/Green/Fuchsia coextruded Silk PLA filament: https://www.printables.com/model/523118-spool-rotator
Based on the Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman
https://www.youtube.com/c/ZackFreedman
License: CC BY-NC-SA 4.0 https://creativecommons.org/licenses/by-nc-sa/4.0/
#gridfinity