MK4 Prusa Enclosure Tool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a place for all the tools that came with my Prusa MK4 that would bolt onto my original enclosure.
- Ocena
- 4,767 / 5
- Polubienia
- 128
- Pobrania
- 700
- Wydruki
- 33
- Wyświetlenia
- 3969
- Oceny
- 30
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I remixed this tool holder from Sebastian's original one because I wanted a place for the allen wrenches that came with the MK4. I also added a place to put the grease bearing nozzles. I didn't give them a ton of clearance so they overlap a little but it works. Behind that is a place for the all in one wrenches.
This model screws in directly from the inside of the enclosure, no inserts needed
Hardware need:
- 2x M3x8 screw
Print instructions:
- print settings: 0.20mm
- filament: PETG
- 15% grid infill or more.
I printed in PETG with just basic supports for the hex hangers and a little color change at the top to make it look snazzy.
Printing Tip: You can mirror the part in PrusaSlicer if you would like to mount it on the opposite side.
Enjoy!!