Prusa XL Rasp Pi Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple holder for a Raspberry P.i that mounts on the side of the Prusa XL case
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 101
- Wydruki
- 3
- Wyświetlenia
- 923
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I wanted a simple holder for a Raspberry Pi that would mount to the side of the Prusa XL case using the slot on the side rails. It is sized to fit a standard Pi case with fan and has an access hole to plug in the USB power cord. I printed it with the end with the triangular support on the bed and used a brim for insurance. I printed it with 0.32mm layers using the 0.6mm nozzle using PLA.
I'm hoping I will be able to use it in the future but right now I'm having difficulty getting Octoprint to work with the XL.
I included the Fusion 360 file. Sorry, but I was lazy and did not do a parametric design so changes will be a little more complicated if you need them.