MGN12 Linear Rail stop block, created for my V1E v4 3D printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stop block for MGN12 Linear Rail, used for my V1E printer, see https://forum.v1e.com/t/mp3dp-v4-azas-build/37251/200
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 398
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Created simple MGN12 linear rail stop at https://github.com/aaronse/v1engineering-mods/blob/main/mp3dp-v4/mods/z-post-stop/z-post-stop-v2.stl. Am using to help hold up printer build plate when tinkering. Recommend PETG or something with similar flex.
Am frequently accessing controller/components under the build plate. Also, holding the plate up can help when showing off your build... Was using zip ties, but frustration drove me to create these blocks that can sit in a 2020 channel (flat, not vertical) when not in use.
Shared my printer build journey at https://forum.v1e.com/t/mp3dp-v4-azas-build/37251/200 . Printer is a V1 Engineering design, but uses parts/components from various popular printers (e.g. Voron), and some custom parts like this.