Bambu P1P/P1S AMS riser for Glass top
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a derivative of the official Bambu AMS riser so that i can have it raised above my glass top on the P1P or P1S
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 134
- Wydruki
- 1
- Wyświetlenia
- 3749
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
bought the original glass top from Bambu for my P1P, wanted the AMS to be raised a little so i can add some lights on the bottom. didn't like the other versions i found, so i chopped off the bottom of the official Bambu design - https://wiki.bambulab.com/p1/manual/upgrade-list/ams_holder.3mf and built a simple riser for the AMS. However, since the glass top is so smooth, it was sliding when furiously printing, so i made some shoes in TPU for it.
So print the riser in PLA, then print the shoe in TPU. It sits pretty well now, and doesn't slide (as much) - i think the type of tpu is important to make it less slidy.,.. hope this works for you! Oh, and with the P1S arrival, this works for the P1S as well as the P1P.