Deckhand - 5-dart holder for the LeedleDynamics Corsair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep 5 extra darts easily at-hand with this simple picatinny-mounted dart holder.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 169
- Wydruki
- 2
- Wyświetlenia
- 1126
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed for the LeedleDynamics Corsair (https://www.etsy.com/listing/1509623188/corsair-break-action-single-shot ), but will likely fit lots of blasters with Picatinny rails. Intended to hold half-darts, but will likely hold most full-length darts as well. No hardware required, roughly 25g of filament to print. One is shown on the blaster in the pictures, but you could mount several if you wanted to increase the carrying capacity.
Depending on your printing setup, it's possible that the pin holes might need a quick touchup with an x-acto or a file, but likely not much. Slide the holder down the picatinny rail and stick the pin through one of the cutouts to keep it firmly mounted.