1 / 1
2007 Vectra C Wiper Pop Socket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Model Designed by Myself to fix the wipers on my Vauxhall Vectra C 2007 Model
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
This was designed to fix the Wiper Arm on my Vectra C, it was printed in PETG because of the outdoor use as its under the bonnet of the car.
if i had abs at the time i would have done it in ABS but i didnt unfortunately
my setting for this were
hot end 245 deg
bed 70 deg
no part fan
50mm/s
I had supports in but I think this would be ok to print without
this really helped me out and I can only hope it does the same for others.
Happy Making