1 / 3
Planet Unknown Insert
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for the retail and deluxe editions of Planet Unknown. Fits sleeved cards and allows vertical storage.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 427
- Wydruki
- 9
- Wyświetlenia
- 2922
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 9) (Komentarze: 9)Remiksy (0)Kolekcje (94)Powiązane
There does not seem to be any 3D printed insert for the retail or deluxe editions of the board game Planet Unknown. So, therefore I decided to design one myself.
Features
- Fits sleeved and unsleeved cards
- Individual player component boxes and game components boxes
- Lids have finger holes for easy retrieval and opening. Also, lids can be attached to the underside of its tray
- Allows vertical storage with additional S.U.S.A.N. Cover
- All insert components can be printed on a 18x18 cm bed (e.g. Prusa Mini+)
The original injection molded insert must be removed for this insert to fit in the box.
Content
- 1 score card tray and lid
- 2 card trays and lids
- 6 medium game component boxes and lids
- 6 small player component boxes and lids
Print Settings
Use the following settings to print the insert components with a hexagonal pattern.
- Nozzle Diameter: 0.4 mm
- Layer height: 0.25 mm (can be increased if your printer allows it)
- Perimeters: 4
- Solid Layers Top: 0
- Solid Layers Bottom: 0
- Detect Thin Walls: On
- Fill Gaps: On
- Fill Density: 20%
- Fill Pattern: Honeycomb
Nice to haves
- It is recommended to also print the S.U.S.A.N. Cover made by FirstKlund to allow vertical storage of the box. I would also recommend to print the Locked Tech tokens by 3D Lee.