1 / 3
Ratchet Strap Corner Protector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plastic corner protector for a ratchet strap.
- Ocena
- 5 / 5
- Polubienia
- 94
- Pobrania
- 506
- Wydruki
- 3
- Wyświetlenia
- 1592
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 6)Remiksy (1)Kolekcje (157)Powiązane
I designed this corner protector to use under a 1" wide ratchet strap to protect both the strap and the thing you are holding down. Place on a sharp corner/edge and run the strap over the top of it. Print it with 100% infill on its edge with a brim to keep it coming loose. No support needed. I included the original Solidworks file and a STEP file if anyone wants to modify it.
