HeroMe 5 Ender 5+ Gantry Adapter Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For some reason known only to the 3D Printer Gods the HeroMe 5 Gantry Adapter, either from the official package or…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
For some reason known only to the 3D Printer Gods the HeroMe 5 Gantry Adapter, either from the official package or from 11Pump, does not fit my Ender 5 Plus gantry, where the version from 11Pump fit my base Ender 5 just fine. Maybe there's one specifically for the E5+ gantry and I missed it, I don't know. I remixed 11Pump's version. v1.4: moved the Gantry Clip holes to the Left by about 1.5mm, made a recess for the bolt head for the top right pom wheel on the first version. v1.41: additionally, moved the top bar above the stock hotend mounting points up a few mm, and made a cutout for the stock hotend right mounting point.
After test fitting v1.4 and v1.41, either one will work.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
100%
Filament: Sunlu PETG Black
Notes:
I printed mine using a 0.6mm nozzle at 0.2mm LH, 0.6mm LW, 3 walls, 100% infill (probably overkill), with supports (although it will probably print fine without supports), at 250/75dC. Printing three walls with 20-30% infill would probably be fine, but I'm CYA type who doesn't want to take chances.
Category: 3D Printer Parts