Anvil
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
While waiting for replacement pneumatic fittings for my Ender 3 (the one at the extruder broke and wouldn't retain the…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 275
- Wydruki
- 0
- Wyświetlenia
- 1035
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
While waiting for replacement pneumatic fittings for my Ender 3 (the one at the extruder broke and wouldn't retain the bowden tube anymore), and printing the latest Lightsaber design to make sure it's all goodbefore I upload it (couple kinks, but I think it's with my prints and not the models), I decided to model an anvil following Blender Guru's YouTube tutorial series to improve my modeling skills, and because I just wanted an anvil. Also, since I love to make things, and Hephaestus is the god of smithing, I felt it was appropriate. And I wanted an anvil.
I used a pic of an Emerson anvil for reference. This is an approximation just for fun. I'll probably remix this with a gear embossed on the side, like the one in my logo. And I also want to do a Sword in the Stone sort of thing, so there will be a remix with that, eventually.
I scaled this one down for printing since my original is something like 14 ft across (I didn't care about scale and started with a 100 cm plane). This one was supposed to be about 2.5 ft across but is coming up in Cura at about 2.5 in across, so depending on if you want this the size of a Benchy or not, you'll probably want to play with the scale in Cura so it's what you want.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament: Hatchbox PLA Silver
Notes:
This will need supports for the overhangs if you print it whole (with CHEP 0.2mm settings at 15% infill and 3 walls, I'm getting approx 1 hr 33 mins and 11g 3.61m of filament in Cura), or the split model (with minimal or no support at 1 hr 12 mins and 9g 3m of filament, not a huge difference, considering you'll have to glue it together). Your choice of which to print. I'd rather print it whole to avoid supergluing my fingers together.
Category: Props