Bolt Sorting Sieve Screen - #6 Wood Screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Additional screen for Bolt-Sorting Sieve. Screen has 8.2 mm pores for #6 wood screws
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 163
- Wydruki
- 2
- Wyświetlenia
- 1716
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
Info on the Bolt Sorting Sieve, and links to other screens, can be found HERE
A 'screen' for #6 wood screws for my little bolt sorter. Each screen prints in about an hour on my settings, with no supports, brims, etc. needed. I printed mine from PETG with 0.48 layers on a 0.6 nozzle. I probably would have gone with PLA if I had any handy. I think the stiffness of PLA (and a bit better dimensional accuracy, at least with my machine/settings) would probably be good for longevity with the bolts beating against the interior. But, that being said, I'd shaken a good number of fasteners in my other PETG screens, and they are still holding up pretty well thus far!
Category: Tools