Micro Marblerun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Micro Marblerun - a minimalist marble machine.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Micro Marblerun - a minimalist marble machine with screw lift. The two parts are designed to snap together. Use with 8 mm steel balls.
Serves as a nice little gift or addictive toy for your desk.
Youtube demo: https://youtu.be/j0E56CbSJo4
Installing the screw lift: https://youtu.be/i-PeAw9IH5Y
Print at 118% to fit a 9.5mm (3/8") ball bearing - thanks to V4HE for mentioning this in his make.
Print instructions
Category: Mechanical Toys Summary
Micro Marblerun - a minimalist marble machine with screw lift. The two parts are designed to snap together. Use with 8 mm steel balls.
Serves as a nice little gift or addictive toy for your desk.
Youtube demo: https://youtu.be/j0E56CbSJo4
Installing the screw lift: https://youtu.be/i-PeAw9IH5Y
Print at 118% to fit a 9.5mm (3/8") ball bearing - thanks to V4HE for mentioning this in his make.
Print Settings
Printer Brand:
RepRap
Printer:
Huxley
</div>Rafts:No
Supports:
No
</div>Resolution:0.3 mm
Infill:
25%
</div>Notes:
No specific print settings needed, I have used these for example:
- 0.3 mm layer height with 0.5 mm hotend
- 3 shells (2 should be plenty enough)
- 25% hexagonal infill
- 2 solid bottom layers, 2 solid top layers
Seam position aligned
Post-Printing
Clean the inside of the tower, the entrance/exit as well as the contact surfaces between the two parts. Make sure the bottom of the screw is flat. Test if the ball can enter the tower without resistance. Do this before installing the lift screw, it is difficult to remove once snapped into place.
Video