1 / 3
Avalanche v4 low profile case for 60% and 40% variants
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a low profile case for the Avalanche v4 with optional tenting.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (8)Powiązane
This is a tenting case for the Avalanche v4 (https://github.com/vlkv/avalanche). To add the tenting legs you will need to use M3 heat set threaded inserts and M3 screws. There are variants for the 60% and the 40% versions, as well as a 60% sans pinky keys.
Inserts: https://www.amazon.com/dp/B07LBRB5HL?psc=1&ref=ppx_yo2_dt_b_product_details
Tenting Legs: https://www.printables.com/model/276982-switch-blockers-tenting-legs-and-knobs