BambuLab Storage Tray (Fits Ikea Alex)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storage tray for BambuLab Printer accessories
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 189
- Wydruki
- 3
- Wyświetlenia
- 2068
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple remix of the storage box by Austin Smith. Designed to fit perfectly in an Ikea Alex drawer(there will be a slight gap to compensate for the screws in the drawers), but can obviously be used on or inside other desks. I also put rubber pads on the bottom so they would not slide when opening/shutting the drawer.
The compartments for the belt boxes/small part boxes are snug. This was a quick remix so if you run into any issues feel free to let me know.
Printed at .2/20% infill/no supports.
If you found this useful, please consider buying me a beer!