Quick cable hanger for closetmaid wire shelves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick cable hanger for closetmaid wire shelves
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
What?
Hang cables from the underside of wire shelves. These cable hangers use the flexibility of plastic to secure the cables in a way where they're easy and fast to insert and to grab.
Compatibility
The cable hangers are designed for wire shelves from the closetmaid brand (3mm rods spaced ~28.15mm apart). The source CAD file (in freecad and step formats) is available for you to tweak it to fit anything else.
How?
They can be a bit tricky to get on (because the tolerances are pretty tight, they need to be or you'll rip them off when using them). The easiest way is to insert it from below, but rotate it about 30 degrees first. Then once it's in the right place, rotate it to lock it in.
I used in PLA, other materials might not work as well because the design relies on the material's properties. Try your luck and tweak the design if it doesnt work (it might be interesting to make them out of TPU). Remixes for other materials are welcome.