1 / 8
Sapphire plus with VZbot printhead and new Gantry — zdjęcie 1
1 / 8

Sapphire plus with VZbot printhead and new Gantry

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sapphire Plus 3D printer and All new Gantry and VZbot Printhead

Ocena
0 / 5
Polubienia
46
Pobrania
261
Wydruki
0
Wyświetlenia
3071
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

For VZBot printhead or cnc version you dot need do any changes, but for Sapphire Plus 3D printer you need make some chages. 

All top cover need turn 180 degree around, my was from factory all ready bend and im not using it. 

Motor holders can find cheap in Aliexpress, its was about 5usd/euro

Pulley holders can try to print, but i will find someone who can cnc mill for me, at least I hope i will find. 

XY carriage joiners are part who need print or can buy just vzbot cnc part and print just L shape converter who can glue on top plus using two m5 screws holding together. 

VZbot printhead need MGN9H linear rail, original MGN12 can use, sorry. Only addition I made was BLtouch (3D Touch move to front from back stupid 5015 blower fan. 

 

IF YOU LIKE MY WORK, BUY ME DRINK - https://ko-fi.com/alexvikingo 

Tagi