Spool holder for Anycubic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool holder for those small spools axle diameter 20mm.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 143
- Wydruki
- 1
- Wyświetlenia
- 619
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Spool holder for those small spools axle diameter 20mm.
Designed for Anycubic-s spool holders as you can see on the picture.
If you choose to print it in one piece I recommend supports, see picture of support locations that I used and it came out good. I used supports offset of 150% when printing 0,2 layer height, was not very hard to remove.
If you choose to print the 2 piece version, please use both A and B files because of thread. Also you dont need supports. Dont worry, when you put those 2 pieces together and turn it to holder, it will be solid and you can use screw normally, it acts like wedge. If you want, you can always super-glue those 2 parts together.
If you like it, don't be afraid to show it ;)
Print Settings
Printer Brand:
Anycubic
Printer:
Kobra
Supports:
Yes
Resolution:
0,2
Infill:
15
Category: 3D Printer Accessories