Display stand for Kinder Joy Funko Pop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display stand for 12 Funko Pop Harry Potter mini figures from Kinder Joy surprise eggs.
- Ocena
- 5 / 5
- Polubienia
- 222
- Pobrania
- 1573
- Wydruki
- 12
- Wyświetlenia
- 12 004
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Suitable for Funko Pop and other figures with the height of ca. 4 cm.
Simple castle themed shelf I made to house our collection of Funko Pop mini figures from the Harry Potter series, which came in Kinder Joy surprise eggs this year.
There is a place for all 12 figures, plus you can also put the pencil heads on the upper shelf.
Sadly each figure has a different shape of the hole in their legs, so I choose to use poster putty instead of creating a special peg for each figure.
Edit 22. 8. 2023:
Added the “robust” version with revised overhangs and wider pillars for easier and more stable print. Now there should be no need for exacto-knife-post-process on the overhangs.
Print details
Original version:
Printed on MK3S+ with PLA Marble Grey Prusament.
I used 0,3 layer and no supports. Worked for most filaments that I tried, but I had to finalize my overhangs with my exacto knife. If you have issues, go for the robust version.
Robust version:
Printed on MK3S+ with PLA+ Pastel Pink by PM.
0,3 layer and standard settings.