1" Mini Surf Fin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini Fin(1inch) for Empty Pin slot. It looks cool but I'm not sure it'll work on actual Surfing.
- Ocena
- 4 / 5
- Polubienia
- 21
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 974
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mini Fin(1") for Empty Pin slot.
It looks cool but I'm not sure it'll work on actual Surfing.
Recommand 100% infill Density and More than 5 perimeter with 0.2mm Layer height.
And for Clean Oceon, Please Use PLA
Confirmed to fit on Torq Modfish 7.2ft TETcs Surfboard
서핑보드의 빈 핀자리에 끼울 미니핀입니다!
실제로 페들링이나 파도타는데 영향을 주는지는 잘 모르겠다만,
보기엔 정말 이쁩니다
인필 100%에, 외벽둘레 5이상, 0.2mm 레이어두께로 출력 추천드리며,
자연을 위해 버려지더라도, 생분해가 되는 PLA소재 사용을 권장드립니다.
Torq 사의 Modfish 7.2ft TETcs 서프보드에 완벽하게 장착되는것을 확인했습니다!
Designed by Eddy. from @Jacky_is_working