Large LEGO box (230x230x150mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of a LEGO box by Wivry. Made the floor/walls minimalistic, to maximize storage space.
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 421
- Wydruki
- 1
- Wyświetlenia
- 2433
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This is a remake of Wivry's box.
Size chosen to fully utilize the available Bambu P1P plate size. (For utilizing the full 256x256 plate size, see instructions)
Height was chosen to coincide the official LEGO box height (150mm)
You can also check out my other big LEGO box. It's prettier, but more wasteful.
Optimized it to use minimal amount of filament:
Cover:
Infill: Lightning, density: 25%
Brim: No brim
Support: normal(auto)
Filament used: ~200 gram
P1P print time: 6.5 hours
Box:
Infill: Grid, density: 25%
Brim: Outer only, 5mm
Support: None
Filament used: ~460 gram
P1P print time: 11 hours
Note #1: Prints fine in regular P1P speed, no need for reduced speed
Note #2: I recommend using a glue stick on the entire print surface, because the model is very wide (takes up the entire print surface) and you don't want it to bend while printing.