Modular paper towel holder (SMALL version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for your rols of paper towel, it is designed to swap the roll with ease.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 919
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Standard Digital File License
This is a holder for your rols of paper towel, it is designed to swap the roll with ease. It is modular because you can make ‘part one’ the lenght of a regular toilet paper rol and than you can use it for that.
Parts:
- Screws, you can pick any length as long as they fit in the provided hole.
- 3D printed parts
- paper towel
- superglue
I suggest you try to print the parts like I did (I made photo's)
If you split “PART one” in TWO halves you wil need glue to glue them togheter.
I tried to make a drilling template, but it didn't work out, so if you want any guide lines for the drilling, here they come: you basically need a rectangle (128mm by 45mm) and in each corner you drill a hole (disclaimer: I didn't test this method, i just went with the feeling;) )
To put a new roll in you just take out Part one, to put the roll bach in you just basically put the roll on part one and snap it back in place. (really easy)
Happy printing ;)
If you have any questions, do not hesitate to contact me!