Shot Dispenser for 6/5/4/3 glasses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dispenses the liquid in multiple glasses 100% equally
- Ocena
- 4,9 / 5
- Polubienia
- 128
- Pobrania
- 1337
- Wydruki
- 11
- Wyświetlenia
- 3624
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Function
The reason why it works is a double tunnelsystem per tube.
First the liquid goes only trough the small pipes, so the chamber gets filled.
Due to the hydrostatic pressure in the full chamber, all exits get the same amount of liquid.
The small tunnel also prevents a liquid waste in the device itself.
Please keep in mind that it only works if the tabel is leveled!
Also you should only use glasses with the same hight.
The exits should face down (see picture 3 )
Print settings doesn't matter that much
I printed it with PLA (PETG should be fine to)
Infill 10% - 20% Gyroid
0.2mm hight
0.4 nozzle
No supports needed
Print time around 3.2 h
PLS post your makes 🙂