OG pfSense Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Old School pfSense logo for a firewall box.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
I have run pfsense for years now and have always been fond of the OG logo. I made this to stick to the outside of my firewall box. Yes, I know they are Netgate now.. just not a fan of that logo.
Overall just a simple, straightforward design. No special settings are needed. Depending on your printer, the small p and f inside the logo may not come out super clear due to the small size. Dimensions are 40mm Wide x 10mm Tall
I have included multiple versions for different magnet sizes.
The one I printed in the pictures was for the 5x3 magnets.. Just what I had on hand. Yes it does make it a tad on the thicker side but it doesn't bother me.
I have one that is much thinner and you can use double-sided tape to stick to the case if you chose to.