Sim Knobs 45x23mm for CTS288 rotaries
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For use with CTS 288 Rotary knobs with and without button press.
- Ocena
- 0 / 5
- Polubienia
- 88
- Pobrania
- 398
- Wydruki
- 0
- Wyświetlenia
- 2035
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
For use with CTS 288 Rotary knobs with and without button press.
The Rotary knobs with button press are MUCH more durable than those without.
The spindle for the rotary knobs with button press are .5mm taller and coincidently have a .5mm throw. So the same hole size works for both.
Brake Bias
ABS
Traction Control
Included full Fusion 360, STL, gcode for Prusa and Prusa Slicer project files. Have fun!
Warning: Will require some X-acto knife clean up for strings on the letters.
Print instructions
Category: Toys & Games Summary
For use with CTS 288 Rotary knobs with and without button press.
The Rotary knobs with button press are MUCH more durable than those without.
The spindle for the rotary knobs with button press are .5mm taller and coincidently have a .5mm throw. So the same hole size works for both.
Brake Bias
ABS
Traction Control
Included full Fusion 360, STL, gcode for Prusa and Prusa Slicer project files. Have fun!
Warning: Will require some X-acto knife clean up for strings on the letters.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
</div>Rafts:No
Supports:
No
</div>Resolution:0.07 - 0.15
Infill:
15%
</div>Filament:
Prusament PLA Pearl Red, Opal Green, White
Notes:
Multi-color prints with white as the second color.
My print started at 0.15mm thickness, but I made sure that it was only 0.07 for the top flat layers before the lettering.I thoroughly purged the dark base filament with white before letting it print the letters.