Button Box Ribbon cable 8P / 16P / 20P 2.54 head connector mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm using these to secure ribbon cables near my button box panels.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 465
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
I'm using these to secure ribbon cables near my button box panels.
These are for 8P/16P/20P 2.54mm Socket Header Connector ISP Male Double-spaced Straight needle Curved needle connectors.
I'm using them on both sides. One on the panel side and one on the Bodnar 64 input card side with ribbon cables between them and then jumper cables between the pins and the Bodnar card and between the panel connector and the buttons, toggles, switches, joysticks and rotaries.
Uses M3 bolts and square nuts for the cover.
Uses M3 bolts and M3 threaded inserts to secure to the button box.
Coming soon: Entire button box solution that uses this.
Print instructions
Category: Toy & Game Accessories Summary
I'm using these to secure ribbon cables near my button box panels.
These are for 8P/16P/20P 2.54mm Socket Header Connector ISP Male Double-spaced Straight needle Curved needle connectors.
I'm using them on both sides. One on the panel side and one on the Bodnar 64 input card side with ribbon cables between them and then jumper cables between the pins and the Bodnar card and between the panel connector and the buttons, toggles, switches, joysticks and rotaries.
Uses M3 bolts and square nuts for the cover.
Uses M3 bolts and M3 threaded inserts to secure to the button box.
Coming soon: Entire button box solution that uses this.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
</div>Rafts:No
Supports:
No
</div>Resolution:0.15
Infill:
15%
</div>Filament:
Prusament PLA White