Rock On v2 by fingerpunch Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a design for the Rock On v2, but should fit the v1 as well.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case for the Rock On v2 (and also v1) keyboard by fingerpunch. It is designed to print in 5 pieces for printers such as the Ender3 or Ender5. It fastens with M2 heat-set inserts on the underside of the switch plates and 10mm M2 screws from the bottom of base. The center piece fastens with 6x3mm neodymium magnets.
There is an overabundance of M2 heatset insert holes on the underside of the switch plate halves. This is for options with selecting how to fasten your case. You can use the 8 holes through the PCB, or for certain earlier/prototype fingerpunch PCBs which did not have mounting holes in the PCB, the outer holes will work for those PCBs. Or if you wish to have no solid points of contact under your keys, the outer holes would be a good option for you.
Inserts: https://www.amazon.com/gp/product/B08ZJ6F39F/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Magnets: https://www.amazon.com/DIYMAG-6x3mm-Refrigerator-Premium-Brushed/dp/B07KZQGWNN
NOTE: Many of the center pieces are untested. I have only printed the Cirque with OLED mid pieces (both flat and curved overlay options) and they fit great.