1 / 2
Honeycomb monitor stand - Remix 18mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix for boards at about 18 mm thick
- Ocena
- 5 / 5
- Polubienia
- 79
- Pobrania
- 322
- Wydruki
- 1
- Wyświetlenia
- 1548
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 5)Remiksy (0)Kolekcje (121)Powiązane
Remixed the Monitor Stand to fit boards about 18mm thick.
The space for the boards is 19mm so I had enough play to slide it onto my board without to much trouble.
Also got rid of the chamfers in the corners so rectangular boards can be used without need for a router. Should print without any supports