PrintABlok Support Panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little diagonal support can go a long way
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Panels are special versions of PrintABloks that are as thin as PrintABloks can be. The connector hole can be accessed from either side of the panels, but not both sides at the same time. Panels wok great for improving structural elements of PrintABlok builds.
Sometimes a little diagonal support can create a lot of structural strength. For those reasons these diagonal panels can be a great addition to your builds.
PrintABlok are interlocking building toys created by the 3D Printing Professor, designed towork well on home 3D Printers. PrintABloks can be built in all 6 directions, allowing for gravity defying building unlike any other building block out there.
If you are interested in getting a greater variety of blocks, including articulated blocks and decorative elements to build PrintABlok mechs, you can check premium sets here:
http://printablok.com/